8 way 10ft or 16.5ft XLR Extension Snake Loom Tapered Fanout for Rack on Left side of Mixer- Premium 

Designed for half rack width wireless mic reveivers like Shure QLXD, SLXD, BLX-R, Sennheiser EW series

Available for left ot right of mixer mounting


  • Premium Quality - think Whirlwind or even Mogami
  • Black XLRs with Channel Numbers,
  • Tidy Rack Robust Fanout
    • Tapered at Female end to suit 1/2 width wireless mic receivers
    • Tapered at Male end to suit rack mount on Left side of mixer
    • Each Fly Cable is covered with cut resistant webbed sleeve

Model# CL8.0

Manufacturers Suggested Selling Price $199.99 - save 59%

  • These XLR cable snakes feature 8 sets of male-to-female XLR cables assembled into a single, soft and durable, cable jacket.
  • Each XLR connector has a black metal housing, black rubber cable grip-boot with a numbered identifier. 
  • The fanout cables are covered with a heavy duty black braided sheath over the PVC jacket (like used on premium guitar cables) for added durability.  The fanout cables are different lengths tailored to tidily connect to 8x 1/2 rack width wireless microphone receivers leaving the inside of the rack nice and tidy
  • The fanout-multicore cable junction is covered by a molded strain relief - not just heatshrink like most of the competition. 
  • There are few brands of extension snakes out there of this quality and most are 1.5 to 2 or even 3 times the price.

.

SPECIFICATIONS:

  • Multicore Cable:    MC08 - 8 x shielded and jacketed twisted pairs 25 AWG conductors - 1/2" (12mm) outside diameter
  • Overall Length:  ~3m (about 10ft 4 in) connector to connector
  • Length between fanout junctions - 2.2m (7ft in)
  • Fan out fly cable lengths at female (Panel output) end left mount (right reversed): 
    • XLR 1 - 450mm about 18.6"
    • XLR 2 - 250mm about 10.2"
    • XLR 3 - 500mm about 20.7"
    • XLR 4 - 300mm about 13.5",
    • XLR 5 - 550mm about 22.7"
    • XLR 6 - 350mm about 14.3"
    • XLR 7 - 600mm about 22.8"
    • XLR 8 - 400mm about 18.6"
  • Fan out fly cable lengths at male (input to mixer) end left mount (right reversed): 
    • XLR 1 - 300mm  about 12.3"
    • XLR 2 - 330mm about 13.5"
    • XLR 3 - 360mm about 14.7"
    • XLR 4 - 390mm about 15.9"
    • XLR 5 - 420mm about 17.2"
    • XLR 6 - 450mm abot 18.4"
    • XLR 7 - 480mm about 19.6"
    • XLR 8 - 510mm about 20.9"
  • Identification:  each XLR connector has a number identifier from 01 to 08 on both ends.

 USES:

        • Wireless microphone racks to mixer
        • Between Rack interconnects

    bodymics

    (N1) XLR CL8.Hxx Rack Snake : TAPERED FANOUT for 1/2 width wireless receivers - 8x XLR(f) - XLR(m) - Premium Extension Snake - 10 or 16.5ft - Left Side or Right Side (Loom Audio)

    SKU CL8-H10-L
    $ 153.99
    $ 77.00

    8 way 10ft or 16.5ft XLR Extension Snake Loom Tapered Fanout for Rack on Left side of Mixer- Premium 

    Designed for half rack width wireless mic reveivers like Shure QLXD, SLXD, BLX-R, Sennheiser EW series

    Available for left ot right of mixer mounting


    • Premium Quality - think Whirlwind or even Mogami
    • Black XLRs with Channel Numbers,
    • Tidy Rack Robust Fanout
      • Tapered at Female end to suit 1/2 width wireless mic receivers
      • Tapered at Male end to suit rack mount on Left side of mixer
      • Each Fly Cable is covered with cut resistant webbed sleeve

    Model# CL8.0

    Manufacturers Suggested Selling Price $199.99 - save 59%

    • These XLR cable snakes feature 8 sets of male-to-female XLR cables assembled into a single, soft and durable, cable jacket.
    • Each XLR connector has a black metal housing, black rubber cable grip-boot with a numbered identifier. 
    • The fanout cables are covered with a heavy duty black braided sheath over the PVC jacket (like used on premium guitar cables) for added durability.  The fanout cables are different lengths tailored to tidily connect to 8x 1/2 rack width wireless microphone receivers leaving the inside of the rack nice and tidy
    • The fanout-multicore cable junction is covered by a molded strain relief - not just heatshrink like most of the competition. 
    • There are few brands of extension snakes out there of this quality and most are 1.5 to 2 or even 3 times the price.

    .

    SPECIFICATIONS:

    • Multicore Cable:    MC08 - 8 x shielded and jacketed twisted pairs 25 AWG conductors - 1/2" (12mm) outside diameter
    • Overall Length:  ~3m (about 10ft 4 in) connector to connector
    • Length between fanout junctions - 2.2m (7ft in)
    • Fan out fly cable lengths at female (Panel output) end left mount (right reversed): 
      • XLR 1 - 450mm about 18.6"
      • XLR 2 - 250mm about 10.2"
      • XLR 3 - 500mm about 20.7"
      • XLR 4 - 300mm about 13.5",
      • XLR 5 - 550mm about 22.7"
      • XLR 6 - 350mm about 14.3"
      • XLR 7 - 600mm about 22.8"
      • XLR 8 - 400mm about 18.6"
    • Fan out fly cable lengths at male (input to mixer) end left mount (right reversed): 
      • XLR 1 - 300mm  about 12.3"
      • XLR 2 - 330mm about 13.5"
      • XLR 3 - 360mm about 14.7"
      • XLR 4 - 390mm about 15.9"
      • XLR 5 - 420mm about 17.2"
      • XLR 6 - 450mm abot 18.4"
      • XLR 7 - 480mm about 19.6"
      • XLR 8 - 510mm about 20.9"
    • Identification:  each XLR connector has a number identifier from 01 to 08 on both ends.

     USES:

          • Wireless microphone racks to mixer
          • Between Rack interconnects
      $ 153.99
      $ 77.00
      Length:
      Mounting Side:

      Frequently Bought Together

      Total price $ 212.99

      Product Description


      8 way 10ft or 16.5ft XLR Extension Snake Loom Tapered Fanout for Rack on Left side of Mixer- Premium 

      Designed for half rack width wireless mic reveivers like Shure QLXD, SLXD, BLX-R, Sennheiser EW series

      Available for left ot right of mixer mounting


      • Premium Quality - think Whirlwind or even Mogami
      • Black XLRs with Channel Numbers,
      • Tidy Rack Robust Fanout
        • Tapered at Female end to suit 1/2 width wireless mic receivers
        • Tapered at Male end to suit rack mount on Left side of mixer
        • Each Fly Cable is covered with cut resistant webbed sleeve

      Model# CL8.0

      Manufacturers Suggested Selling Price $199.99 - save 59%

      • These XLR cable snakes feature 8 sets of male-to-female XLR cables assembled into a single, soft and durable, cable jacket.
      • Each XLR connector has a black metal housing, black rubber cable grip-boot with a numbered identifier. 
      • The fanout cables are covered with a heavy duty black braided sheath over the PVC jacket (like used on premium guitar cables) for added durability.  The fanout cables are different lengths tailored to tidily connect to 8x 1/2 rack width wireless microphone receivers leaving the inside of the rack nice and tidy
      • The fanout-multicore cable junction is covered by a molded strain relief - not just heatshrink like most of the competition. 
      • There are few brands of extension snakes out there of this quality and most are 1.5 to 2 or even 3 times the price.

      .

      SPECIFICATIONS:

      • Multicore Cable:    MC08 - 8 x shielded and jacketed twisted pairs 25 AWG conductors - 1/2" (12mm) outside diameter
      • Overall Length:  ~3m (about 10ft 4 in) connector to connector
      • Length between fanout junctions - 2.2m (7ft in)
      • Fan out fly cable lengths at female (Panel output) end left mount (right reversed): 
        • XLR 1 - 450mm about 18.6"
        • XLR 2 - 250mm about 10.2"
        • XLR 3 - 500mm about 20.7"
        • XLR 4 - 300mm about 13.5",
        • XLR 5 - 550mm about 22.7"
        • XLR 6 - 350mm about 14.3"
        • XLR 7 - 600mm about 22.8"
        • XLR 8 - 400mm about 18.6"
      • Fan out fly cable lengths at male (input to mixer) end left mount (right reversed): 
        • XLR 1 - 300mm  about 12.3"
        • XLR 2 - 330mm about 13.5"
        • XLR 3 - 360mm about 14.7"
        • XLR 4 - 390mm about 15.9"
        • XLR 5 - 420mm about 17.2"
        • XLR 6 - 450mm abot 18.4"
        • XLR 7 - 480mm about 19.6"
        • XLR 8 - 510mm about 20.9"
      • Identification:  each XLR connector has a number identifier from 01 to 08 on both ends.

       USES:

            • Wireless microphone racks to mixer
            • Between Rack interconnects

        Customer Reviews
        Add review

        Similar Products

        Customers also bought

          Complementary products

            • ITEM BAR TITLE

              Share shipping, delivery, policy information.

            • ITEM BAR TITLE

              Share shipping, delivery, policy information.

            • ITEM BAR TITLE

              Share shipping, delivery, policy information.

            • ITEM BAR TITLE

              Share shipping, delivery, policy information.