8 way 10ft or 16.5ft XLR Extension Snake Loom Tapered Fanout for Rack on Left side of Mixer- Premium
Designed for half rack width wireless mic reveivers like Shure QLXD, SLXD, BLX-R, Sennheiser EW series
Available for left ot right of mixer mounting
- Premium Quality - think Whirlwind or even Mogami
- Black XLRs with Channel Numbers,
- Tidy Rack Robust Fanout
- Tapered at Female end to suit 1/2 width wireless mic receivers
- Tapered at Male end to suit rack mount on Left side of mixer
- Each Fly Cable is covered with cut resistant webbed sleeve
Model# CL8.0
Manufacturers Suggested Selling Price $199.99 - save 59%
- These XLR cable snakes feature 8 sets of male-to-female XLR cables assembled into a single, soft and durable, cable jacket.
- Each XLR connector has a black metal housing, black rubber cable grip-boot with a numbered identifier.
- The fanout cables are covered with a heavy duty black braided sheath over the PVC jacket (like used on premium guitar cables) for added durability. The fanout cables are different lengths tailored to tidily connect to 8x 1/2 rack width wireless microphone receivers leaving the inside of the rack nice and tidy
- The fanout-multicore cable junction is covered by a molded strain relief - not just heatshrink like most of the competition.
- There are few brands of extension snakes out there of this quality and most are 1.5 to 2 or even 3 times the price.
.
SPECIFICATIONS:
- Multicore Cable: MC08 - 8 x shielded and jacketed twisted pairs 25 AWG conductors - 1/2" (12mm) outside diameter
- Overall Length: ~3m (about 10ft 4 in) connector to connector
- Length between fanout junctions - 2.2m (7ft in)
- Fan out fly cable lengths at female (Panel output) end left mount (right reversed):
- XLR 1 - 450mm about 18.6"
- XLR 2 - 250mm about 10.2"
- XLR 3 - 500mm about 20.7"
- XLR 4 - 300mm about 13.5",
- XLR 5 - 550mm about 22.7"
- XLR 6 - 350mm about 14.3"
- XLR 7 - 600mm about 22.8"
- XLR 8 - 400mm about 18.6"
- Fan out fly cable lengths at male (input to mixer) end left mount (right reversed):
- XLR 1 - 300mm about 12.3"
- XLR 2 - 330mm about 13.5"
- XLR 3 - 360mm about 14.7"
- XLR 4 - 390mm about 15.9"
- XLR 5 - 420mm about 17.2"
- XLR 6 - 450mm abot 18.4"
- XLR 7 - 480mm about 19.6"
- XLR 8 - 510mm about 20.9"
- Identification: each XLR connector has a number identifier from 01 to 08 on both ends.
USES:
- Wireless microphone racks to mixer
- Between Rack interconnects
bodymics
(N1) XLR CL8.Hxx Rack Snake : TAPERED FANOUT for 1/2 width wireless receivers - 8x XLR(f) - XLR(m) - Premium Extension Snake - 10 or 16.5ft - Left Side or Right Side (Loom Audio)
- Regular price
- $ 153.99
- Sale price
- $ 77.00
8 way 10ft or 16.5ft XLR Extension Snake Loom Tapered Fanout for Rack on Left side of Mixer- Premium
Designed for half rack width wireless mic reveivers like Shure QLXD, SLXD, BLX-R, Sennheiser EW series
Available for left ot right of mixer mounting
- Premium Quality - think Whirlwind or even Mogami
- Black XLRs with Channel Numbers,
- Tidy Rack Robust Fanout
- Tapered at Female end to suit 1/2 width wireless mic receivers
- Tapered at Male end to suit rack mount on Left side of mixer
- Each Fly Cable is covered with cut resistant webbed sleeve
Model# CL8.0
Manufacturers Suggested Selling Price $199.99 - save 59%
- These XLR cable snakes feature 8 sets of male-to-female XLR cables assembled into a single, soft and durable, cable jacket.
- Each XLR connector has a black metal housing, black rubber cable grip-boot with a numbered identifier.
- The fanout cables are covered with a heavy duty black braided sheath over the PVC jacket (like used on premium guitar cables) for added durability. The fanout cables are different lengths tailored to tidily connect to 8x 1/2 rack width wireless microphone receivers leaving the inside of the rack nice and tidy
- The fanout-multicore cable junction is covered by a molded strain relief - not just heatshrink like most of the competition.
- There are few brands of extension snakes out there of this quality and most are 1.5 to 2 or even 3 times the price.
.
SPECIFICATIONS:
- Multicore Cable: MC08 - 8 x shielded and jacketed twisted pairs 25 AWG conductors - 1/2" (12mm) outside diameter
- Overall Length: ~3m (about 10ft 4 in) connector to connector
- Length between fanout junctions - 2.2m (7ft in)
- Fan out fly cable lengths at female (Panel output) end left mount (right reversed):
- XLR 1 - 450mm about 18.6"
- XLR 2 - 250mm about 10.2"
- XLR 3 - 500mm about 20.7"
- XLR 4 - 300mm about 13.5",
- XLR 5 - 550mm about 22.7"
- XLR 6 - 350mm about 14.3"
- XLR 7 - 600mm about 22.8"
- XLR 8 - 400mm about 18.6"
- Fan out fly cable lengths at male (input to mixer) end left mount (right reversed):
- XLR 1 - 300mm about 12.3"
- XLR 2 - 330mm about 13.5"
- XLR 3 - 360mm about 14.7"
- XLR 4 - 390mm about 15.9"
- XLR 5 - 420mm about 17.2"
- XLR 6 - 450mm abot 18.4"
- XLR 7 - 480mm about 19.6"
- XLR 8 - 510mm about 20.9"
- Identification: each XLR connector has a number identifier from 01 to 08 on both ends.
USES:
- Wireless microphone racks to mixer
- Between Rack interconnects
- Regular price
- $ 153.99
- Sale price
- $ 77.00
Frequently Bought Together
-
Vendor: HELLERMAN
c. Hellerman Sleeves - 4 sizes 4 colors - 10, 25 or 100 packs
Regular price From $ 8.99 -
Vendor: bodymics Broadway
(A1) BLF4-SH for Shure (SH) 3/16" Omni Hairline/Lavalier Mic - Cream, Brown or Black BLF4x-SH BLF4b-SH BLF4c-SH BLF4m-SH (Bodymics Broadway)
Sale price $ 60.00Regular price $ 119.00 -
Vendor: bodymics
(C7) Wireless Bodypack Transmitter Pouch Belt - black or beige Neoprene Durable, Washable LOWER $
Sale price $ 22.00Regular price $ 29.99 -
Vendor: bodymics
(A82) CD5 Field Replacement Cable for Broadway & Drury Lane Mic Elements - CD5c CD5b CD5m Spare
Sale price From $ 45.00Regular price $ 89.00